(https://makerworld.bblmw.com/makerworld/model/DSM00000000031248/design/2023-10-02_bqed2y2fjloz.jpeg?x-oss-process=image/resize,w_1920/format,webp)
On MakerWorld I saw the this model (https://makerworld.com/en/models/31248-neopixel-lamp-for-256x256-beds). Apparently it is based on this project from Adafruit (https://learn.adafruit.com/neopixel-ring-lamp/overview). When you go to the project page, you can purchase the parts you need right from the page.
So, I started clicking add to cart, and then checked out, figuring I would come back after my parts arrived. :-[
(https://cdn-learn.adafruit.com/assets/assets/000/106/487/original/leds_hero-arc.jpg)
The 60 pixel ring is actually 1/4 of the ring...so, you have to add three more to the cart. I didn't catch onto that until my order finally arrived today and I realized I was missing 3/4 of the ring! :-\
Let this be a lesson to those who don't verify they have everything they need before starting their project. ::)
Looking back, it looks like I also needed two (2) of the 24 pixel rings. 🤓
Looks cool.
Quote from: JKnightandKARR on Jul 28, 2025, 12:49 PMLooks cool.
I still need to order the missing parts. Thanks for reminding me.
EDIT: Okay, parts ordered...
I forgot to add that the parts I was missing came in. Now I just need to print the frame and I can start assembling this project.