Elegoo Centauri Carbon

Started by JKnightandKARR, Jul 04, 2026, 10:57 PM

Previous topic - Next topic
Print
Go Down Pages 1 ... 3 4 5
User actions

granz

#60
Sep 18, 2026, 10:30 PM
Yeah, I am using Elegoo Slicer. I can't figure out why you are having troubles with yours, mine has been working great. Are you using the Windows version? That is the only thing that I can think of that may be different from mine. I am using the Linux version.

JKnightandKARR

#61
Sep 19, 2026, 10:48 AM
Quote from: granz on Sep 18, 2026, 10:30 PMYeah, I am using Elegoo Slicer. I can't figure out why you are having troubles with yours, mine has been working great. Are you using the Windows version? That is the only thing that I can think of that may be different from mine. I am using the Linux version.
Only option, actually, since the only Linux I have is Raspberry Pi. I checked the preloaded filament, which I've never changed; it said 210, so maybe there's another setting I missed??

granz

#62
Sep 19, 2026, 08:45 PM
Yeah, it would be best if you change the hotend temp to match the filament that you are using. Hopefully that will clear up your clog troubles.

JKnightandKARR

#63
Sep 20, 2026, 12:43 AM
Quote from: granz on Sep 19, 2026, 08:45 PMYeah, it would be best if you change the hotend temp to match the filament that you are using. Hopefully that will clear up your clog troubles.
That's actually what causes it... the 140, it supposed to be temporary, but I'll have to check it out with filament removed...

JKnightandKARR

#64
Sep 20, 2026, 11:15 PM
I finally got the top printed for the case, printed ok, but it don't sit down all the way, so might need to adjust something.

JKnightandKARR

#65
Today at 12:47 PM
https://elegoo-downloads.oss-us-west-1.aliyuncs.com/download.elegoo.com/06%20FDM%20Printer/CANVAS%20for%20Centauri%20Carbon/CANVAS%20for%20Centauri%20Carbon%20User%20Manual-English-V1.1.pdf.pdf

My Canvas upgrade is here as of last night, here is the instructions on it, photos to come.  Sadly until I am better from my injury I will NOT be trying to install this, as currently I am limited to 10 lbs and I have to get to the bottom of the machine and access the control board.  While there, I'll probly add a 2nd power switch, to make power on MUCH easier since the switch is currently on the backside....

granz

#66
Today at 03:01 PM
Quote from: JKnightandKARR on Today at 12:47 PMMy Canvas upgrade is here as of last night, here is the instructions on it, photos to come.  Sadly until I am better from my injury I will NOT be trying to install this, as currently I am limited to 10 lbs and I have to get to the bottom of the machine and access the control board. 
That looks interesting, let us know how you like it, and how difficult it is to install. It looks like I will be ordering one of these soon.

Quote from: JKnightandKARR on Today at 12:47 PMWhile there, I'll probly add a 2nd power switch, to make power on MUCH easier since the switch is currently on the backside....
That seems like a good idea - moving the power switch to the front.

I currently have the Carbon, and the Voxel, plugged into the same power strip. Whenever there is lightning in the area, I can just unplug the one power strip and both printers are safe - the A1 is across the room, but it is easy to just reach through the frame and unplug the power cord from the back of the printer.
Print
Go Up Pages 1 ... 3 4 5
User actions
SMF spam blocked by CleanTalk