Need a laser cut and a 3d print done.

[MicroNut]

I just got my DE10-Lite out and the acrylic shield is cracked in two. Is there anyone on the forum that has a laser cutter that wants to take a .. ahem... crack at it? It'll be on clear 3mm acrylic and I'm using mechanical specs and AI to get the shield dimensions since it is an irregular shape.

Also the company that makes the DE10-Lite has stls for the top and bottom for a 3d printed case for the DE10-lite.

Let me know and we'll work out the details. Thanks

[granz]

Give me the link to the .STLs and I will let you know about the printing. Unfortunately, I don't have a laser cutter.

[Chris Savage]

My laser cutter can cut 3mm acrylic, which I do have. I would need an SVG file to do this, however, I am limited to a maximum of ~200mm x ~290mm, based on the size of the 3mm stock I have. I am also not capable (experienced) in bending acrylic, so 2D only.

[MicroNut]

@granz You have to login to the Terasic Website so I attached them and another stl file DE10Lite_BoxV3.

@Chris Savage It is a 80mmX100mm flat piece. The AI came close so I have a little tweaking to do then I'll post it.

Thanks!

[Chris Savage]

It is a 80mmX100mm flat piece. The AI came close so I have a little tweaking to do then I'll post it. Thanks!

Okay, once you post the SVG I will try to run it on the Laserbox.

[granz]

@MicroNut what color would you like? I currently have black, brown, green and white on my A1 and blue on my Carbon. I do have other colors; if you really want something else let me know.

[MicroNut]

Black works for me. Thx

[Chris Savage]

It is a 80mmX100mm flat piece. The AI came close so I have a little tweaking to do then I'll post it. Thanks!

I'm assuming there are mounting holes?